Tag Archives: Alaska

Where to start

My energy for blogging seems to have faded somewhat.  I mean, I want to blog more, but finding the time to peck out posts and especially add photos (they seem to be most time consuming) is the most difficult.  When I get home from a hitch at sea, and have energy, I don’t usually have the will power to sit down and report.  Theres all that other stuff like mow the lawn, fix things around the house, prep the rental house for new tenants, change the oil, drink some beers with the boys, etc. 

So here it is in a nutshell:  I worked my ass off in 2017!

It went something like this: I was home January part of Feburary at which time I had 3 wisdom teeth pulled out.  Everything went fine and I was healed up in no time.

I worked the last half of Feb. in the shipyard on the TGT.  Most of time was spent needle gunning small spaces around the ship that we normally would never get to.

I had a few days off and flew to Honolulu to meet the R/V Sikuliaq.  We sailed approx. 38 days to Newport, OR.  The science on the trip was studying ocean currents and eddies and we deployed and recovered lots and lots of drifting sensors.  The focus is on the mixing that occurs when warm ocean currents collide with cool ocean currents.  It is interesting stuff but when asking the scientists about it, they quickly get so technical that they may as well speak Klingon. 

I got home in early April and had about a month off before heading back to the ship yard for 3 more weeks.  Lots more chipping and needle gunning!

I had two days off and then left on a tugboat to Alaska for 53 days.  We left Seattle with tandem barges.  We dropped the first barge in Ketchikan and carried on with a 380′ to Juneau, Yakatat, Anchorage, Dutch Harbor.  Then reloaded for a trip to Bristol Bay and Naknek.  From Naknek we went further North and made a roughly 90 mile trek up the Kuskowim River to the town of Bethel (good Verizon coverage FYI).  Then on to Dillingham and then back to Bristol Bay where we layed on the wire waiting for enough salmon to be caught, delivered to the cannery, canned and delivered to the dock so we could load it for Seattle.  Ended up in detention, as we call it, for seven days before we could load.  Lots of Beluga  Whales in the Naknek River.  Once loaded, we went back to Dutch Harbor, and finally back to Seattle and home.

For 10 days.  Then I left on another tug to Alaska for 45 days.  This time we hit Whittier, Valdez, Dutch Harbor, Beaver Inlet, Dutch Harbor and back to Seattle and home. 

I had 6 days off and in mid Sept left for a second relief hitch on the R/V Sikuliaq.  This time I met them in Nome, Alaska and we dead headed to Newport, Or (can’t get away from that place!) where we did an OOI buoy deployment trip.

I got home from that trip right smack dab in the middle of deer season so I loaded up the next day and went hunting for 5 days.  Didn’t get one but it felt great putting some miles on the old LPC’s (leather personal carriers).

Had just over 2 weeks off and returned to the shipyard to help put the final touches on the Thompson, do sea trials, shakedown cruises and student cruises and get ready to put her back in full service.  We’ve had a few bumps along the way, but overall it’s gone smooth and the ship is performing well.  We left the shipyard around the 17th of December after 556 days (or something like that).    We are back at our home dock and there are a few yard guys and contractors here working their punchlists.  We have one more big inspection, by the National Science Foundation, next week to certify that we are ready to perform the science mission we’ve been assigned.  Then we will return to our dock for about 10 more days of outfitting before steaming over the horizon.

We are scheduled to go to ports in New Zealand, Taiwan, India, Sri Lanka, South Africa,  Austraillia, Phillipines and to the ice edge in Antartica.

For me, I’ve chosen my schedule very carefully to hit the ports and places that interest me most.   In another 34 days, I’ll hit my “hump day”, or halfway point in my 200 day hitch.  That. Is. Not. A. Typo.  I missed all but 10 days of summer at home in 17′ and in 18′ I’ll be home for almost all of it.  The main reason for such a long hitch is that I will be within an angel’s kiss of enough time for 3rd Mate Unlimited.  I still have to take a celestial navigation course this summer before I can apply.

I have a metric shit ton of photos from the last year.  I’m not sure I have the patience to get them all posted in some sort of orderly fashion but I will try to get some for you to see.

Here is a video I shot from our rescue boat just after we came out of the shipyard.  They were conducting testing on our dynamic positioning system at the time:

R/V Thomas G. Thompson

Hope everyone has a safe and prosperous 2018.

TT

Tug Boating to Alaska

20160827_164917

Hello sports fans!  I’m sorry to be away for so long from my blog (seems to be a recurring problem).

I went to Compass Courses in Edmonds in August for the 5 day Leadership and Managerial Skills course.  The course could have easily been packed into 2.5 days instead of 5, thank you USCG for your foresight on this issue!  On the last day of class, Aug 12th, I finished the final exam at 1100, got in my truck and drove to Everett, where my wife met me at the Dunlap Towing yard and drove my truck home for me while I crewed up on my first tug job.  Pretty much as I stepped on board, the gangway came up and we threw off the lines to get underway to Seattle.

In Seattle we stopped to fuel up and wait for our freight barge to be brought out to us from the Duwamish River by Western Towboat.  Western has a dedicated tug that operates around the Dirty D (Duwamish River) and it common for companies to handoff their barge or receive a barge from the Westrac (Western Towboat’s tug in the area) as they bring it in or out of the river to a waiting tug or place it on the West Seattle Buoys, where barges can be left for short periods of time as sometimes a berth needs to open or a tug is running late and the buoys are where these barges can be placed to keep them out of the way for short periods.

As soon as we fueled and made up to our barge we were underway for Alaska.  Our barge was 330′ and loaded with freight for Alaskan towns with mostly containers and some rolling stock like trucks and a new school bus.  Since I was on the mid watch from 12-0400 with the second mate, I went down for a nap before watch.  We passed very familiar places on the way out of Puget Sound and instead of heading west out of the Straights of Juan De Fuca, hung a right and Rosario Straights towards Vancouver Canada.  We passed through the Seymour Narrows sometime on my off watch when I was asleep and I didn’t get to see the famous narrow spot.  The last time I was through here was when I was a kid and we took our family boat North around 1978 (which I don’t remember much of).

20160813_13175820160815_18272820160816_18031320160817_11391920160817_11402920160817_165831

Other than going to Dutch Harbor and some of the Aleutian Chain last June on the research vessel, I’ve never been to Alaska.  Let me tell you this:  YOU NEED TO GO THROUGH THE INSIDE PASSAGE!  It absolutely stunning!  Of course the route that we took, was the most direct to Juneau possible, there is still an incredible amount of bays, coves, inlets, passes, mountains, etc to keep one busy for a lifetime of cruising.  We passed several cruise ships (it was cruise ship season) coming and going from Seattle to Alaska.  These huge ships haul ass and I could only think about the people who pay to “see” Alaska and then miss over half of it while their ship steams along at 20+ knots while the passengers are sleeping at night.  Of course they get to go many ports and take quick little excursions that we are unable to do on a freight run.

20160817_16583720160817_191929

2.5 days after leaving Seattle, we arrived in Juneau to offload some freight.  We needed to arrive on a tide, offload our freight, backload and lash the oncoming freight and a huge Taylor Forklift and depart before we lost the tide.  I think we were in town for around a total of 3 or 4 hours.  So much for seeing Juneau!  I could only see as much of it as was visible from our tug or our barge.

20160819_13321920160819_162623

A couple of days later we were at the top of the Inside Passage and headed out into the Gulf of Alaska headed toward the Alaskan Town of Yakutat.  Again we pulled in, offloaded cargo, back loaded cargo and departed for sea.  The only major difference from Juneau was the fact that the container yard we tied up to in Yakutat did not have a ramp for the forklifts to drive onto the barge and pick a loaded container and drive it off ashore.  Instead they used the Pass/ Pass technique where the barge forklift sets the container right at the rail and the forklift from shore picks it right off of our deck and drives it into the storage yard ashore.  

20160822_21505020160822_215052

At this point in the trip it was cloudy and rainy and we didn’t get to see shit as far the incredible Chugach Mountain range that we steamed right past.  A couple days more and we entered Cook Inlet heading towards Anchorage.  We arrived around 2200 and worked cargo until around 0200 in the morning and retired for the night.  This port is a major port and has all of the equipment to efficiently offload / backload cargos.  The downfall of this port is the massive 20+’ tide swings.  The tug actually has to break tow and go lay at another dock several hundred yards away from the barge.  When the tide goes out, the barge just sits on the mud bottom while cargo ops continue.  At this point, word came down that our mission would take us to Dutch Harbor with a small amount of container freight but after that we would travel West to Unmak Island and the town of Nikolski to load dirty dirt (more on that later).  In order to load dirty dirt, our barge needed a “fence” built on our barge of 40′ containers stacked two high and lashed all the way around the deck of the barge to help contain the load of dirty dirt.  The dock crew from the yard had this pretty much complete when we turned to in the morning around 0700.  We finished up, returned to the tug and waited for a delivery of stores to arrive (the cook had gone shopping at the grocery store).  As soon as the stores were loaded we made up to the barge and departed for sea.  I think we were in Anchorage for about 10 hours…never left the tug, barge or yard.  Great way to see the sights!

20160823_07490720160823_07492320160823_07500420160823_07501020160823_13011720160824_12243120160825_15455720160825_17384220160826_11331820160826_11335220160826_12460220160826_11333820160826_13234420160826_13234720160826_14563220160826_14563620160826_161155

20160826_18574420160826_19002020160826_19002420160826_19312920160826_220433

Once we got underway, we were headed west to the Aleutians.  The scenery along the Alaskan Peninsula and Kodiak Island was stunning!  While we didn’t have perfect weather we got to see quite a bit of the mountains and had some really good, flat water.  A few days later we arrived in Captains Bay (on the back side of Dutch Harbor Proper).  The scenery here was also amazing and it is nearly impossible to think of a more scenic port!  We discharged all of our remaining cargo and got immediately underway for Unmak Island and Nikolski.  the steam from Dutch was about 24 hours and upon arrival at Nikolski, we entered the bay, slowly steamed into the wind and started dumping wire from the tow winch while zig zagging our way upwind.  at the top of the bay, the tug made a big sweeping left hand turn and continued dumping wire until we were pretty much abeam of the barge about 100 yards away.  This is called “Laying on the wire” and is how we would remain for the next several days as loaded “dirty dirt”.  No anchor needed!

20160826_23350620160826_23354320160827_12501620160827_15121920160827_15123620160827_15400220160827_16491720160827_20415020160827_20413220160828_09532420160828_14380020160828_14380320160828_10452620160828_15070120160828_174247

The town of Nikolski is a group of around 18 houses and an Orthodox Church.  Mostly natives live from what I’m told.  The church, like many places in remote Western parts of Alaska, were built by the Russians way back when.  I’m sure all of the materials had to be brought in as there isn’t a tree in sight in any of the Aleutians that I saw except right in town were someone plated one.

As soon as we were secure, a landing craft came out from shore carrying a load of dirty dirt and picked myself and the ab cook up and took us over to our barge.  The landing craft could load 25 racks at a time.  Each rack carried 3 large bags of dirty dirt.  The dirty dirt is soil that is contaminated by diesel, spilled when the military departed the Aleutians after WWII.  Contractors dig up the dirt, fill the bags and place them on flat racks.  The landing craft crew loads 25 racks in a load and delivers them to the barge where they pass / pass the dirt aboard and we stack it and lash it for the ride to Seattle.  In Seattle, it is offloaded, transferred to rail and taken to Portland, Oregon to be incinerated and decontaminated.  We spent several days loading dirt.  Upon our arrival back at the tug, we found out the remaining crew had been busy catching five fresh halibut.  We gave one to the landing craft and I cleaned the rest as no one else knew how.  Fresh Halibut….Yum!

Once the dirty dirt was loaded, we returned to Dutch to load more dirty dirt that had been recovered from Adak a week or two earlier.  Once we got all of the dirt loaded, we filled in all the remaining space with heavy equipment that was pulling out due to the end of the working season.  We then received word that we would be standing by several days waiting for a second barge to come it from Naknek (Bristol Bay) before we could head toward to home.  We spent our days working cargo ashore or being tasked with moving barges around the harbor.  While we were tied up in Captains Bay, two different captain friends came in on factory trawlers and tied up at the next dock over from us.  Both times, we were so busy that I didn’t get a chance to walk over and say hello.  The next morning when we had time, they were gone.

We did manage to borrow the yard truck and go to the Dutch Harbor Library and get connected to the internet and chat with home.  It was about two weeks since I had been able to check in.  FYI: Verizon does not work in Dutch (AT&T and GCI are the only two at this time that do) but the local library has free wifi.  

We also went over and visited the new Gretchen Dunlap.  The Gretchen is Dunlap’s new harbor tractor tug and is quite impressive.  Read more about her here: Gretchen Dunlap.

Finally, after some weather delays, our barge arrived and we got underway from Captains Bay.  We steamed slowly out of the bay with our barge streamed astern way back on the wire.  The second tug pulled right up alongside of us and we passed them our Swede wire, which they attached to the tow gear.  We pulled tight on their tow gear as they broke off from it and pulled away from us.  We then pulled their tow gear onto our deck and made it up to our second tow wire / winch.  Then we streamed the second barge out, but not as far as our first barge, which was way back.  This is how we travelled back to Seattle.

20160908_13080520160908_13080720160908_13081620160910_12413220160910_12414620160911_13015520160911_13020520160911_16052520160911_16270820160911_17025920160911_17482320160911_19050020160914_11464420160914_12425720160914_14544720160914_152728

It took a total of 14 days to get back to Seattle and other than a couple of days crossing the Gulf of Alaska was very pleasant weather.  As we approached Vancouver Island on the Inside Passage, word was passed that we wouldn’t be allowed to travel further South than Cape Scott (N/ end of Vancouver Island) with two barges and that we would have to take the outside of Vancouver Island to return to Seattle.  Luckily for us, the weather was perfect!

We returned to Seattle and dropped our first barge off to the waiting Western Towboat tugs and while they took that barge upriver, we put the second barge on the buoy for them to retrieve when they are finished with the first barge.  We steamed two hours back to our yard in Everett and 45 minutes after tying up, I was at home, kicking my feet up and chillaxin.

Great trip overall.  There are things I really like about tugs and things I don’t like.  For the sake of any new people getting their feet wet and trying to decide what sector of shipping they would like to get into, here are a few of my thoughts:

Likes:

Small crews and no passengers to deal with.

Better pay than research vessel

Great crews with lots of experience and willing to teach a FNG like me

Towing shit is cool and the making and breaking a tow is cool.

I was left pretty much to my own to find shit to do / what to paint/ projects etc.

Yard is very close to my home

Dislikes:

The tug gets very small after a couple of weeks.  Bring books, movies etc to stay occupied in your time off.

The tug gets its ass kicked in weather more than a big ship.  You will feel it and the tires on the side of the hull take a bit of time to get used to.  The engine noise is much louder than it was on the ship I was on.  I slept with ear plugs at all times.

Comms with home are very limited compared with what I came from.

There isn’t really any schedule going to these remote areas.  Weather and customer delays are common.  Alaska freight is boom or bust depending on the season.  Prepare to be super busy in the spring / summer / early fall and slow in winter for the most part.  This works really well from some people as they like to travel during the winter.

The bunks on the tugs were built for short people.  If you’re tall like me, prepare to sleep sideways or with your legs bent. (Yes, I know I’m being bitchy)

Overall very good trip and I learned a ton!  Total was 37 Days.

 

 

 

North to Alaska on the tug Polar Endurance


Lots happening here since finishing mate school.  The very day I passed Terestrial Nav at the USCG REC in Seattle, myself and one other crew member drove to Port Ludlow, WA to meet the R/V Clifford A. Barnes.  I relieved the captain for the balance of a five day trip.  The trip was a continuation of the trip when we broke down.

After completing the voyage, there really wasn’t much work on the books until mid September so I started running the local Vessel Assist boat again until I could find something else.  I had sent out my resume to several tug / shipping companies.  Last Thursday in the late afternoon, while I was towing a broken Bayliner back to port, Dunlap Towing of Everett, WA called and asked if I was available.  I let them know that I was enrolled in a Leadership & Mangement Skills course the following week.  The course is being required by the USCG to be completed by the end of this year.  The call from Dunlap was late afternoon on Thursday and on Friday morning I was taking a physical, drug test and work test in downtown Seattle.  Dunlap had tossed around a few different start dates but really hadn’t pinned it down for sure.  After the physical, I drove to their office to fill out some paperwork for them and they pinned down the date for this Friday as soon as I get out of class!

Like I said, things are moving fast.  Here is some information about the tug I’ll be on from tugboat information: Polar Endurance

I’ve really only ever been on one other tug, and that was a tour at Western Towboat in Seattle.  I’ve got a lot of learning to do and I’m really looking forward to it.  We are towing a loaded freight barge from Seattle to several ports in SE Alaska and possibly going to Dutch Harbor before heading home.  The one thing I expect is changes to the schedule and port of calls along the way.  It’s Alaska and the weather gods and customers throw lots of curve balls.

For me, Dunlap is just across the bridge from my home town, maybe a 20 minute drive.  Most of the crew changes happen right there, so it is very easy.  Hopefully they will like me and ask me to go on another trip after this one!  Stay tuned.

Todd

Launching Western Towboat’s Bearing Titan

​​​

​A few weeks back, while sitting in class at Crawford’s Nautical School, there was a buzz about a new tug being launched a couple doors down at Western Towboat.  Several of the students and instructors walked over to watch the action.

​​​​


The tug was built by Western Towboat using their own designs.  The launch was not your traditional splash style launch.  Instead, the tug was cradled by two huge wheeled dollies connected to two Kenworth tractors with three drive axles each.  For added traction, the tractors had an extra 24,000 pounds of weight on their flat beds.  A dry dock from Foss Shipyards, directly across the channel, was pushed up to shore and huge ramps installed.  The trucks maneuvered the dollies in tandem, pushing, steering a braking to manipulate the dollies in the desired direction.  As the weight of the tug sank the dry dock, the operation paused to pump out the dock and float it higher.  Once the tug was fully on the dock, I went back to class as it was going to take some time to sink the dock and float the tug out.  All in all, quite the operation.


​​​

The tug makes its first Alaksa freight run in early August.

Aerial drone video of the Thomas G. Thompson

http://okmok.ucsd.edu/index.php/2015/06/19/drone-video/

The drone video is from June when we placed sensors around Okmok Volcano in the Aleutian Islands.   You can see the deck is loaded with the sensors,  which when assembled and dropped to sea floor, measure the magnetic field inside the volcano.  Scientists can tell when and where the hot magma is moving.

The video was shot in the fog, but we were only a couple miles from the island.

https://blueoceanmariner.wordpress.com

Alaska!

Sorry for the lack of recent updates.  We’ve been super busy and when there was a chance to update Blue Ocean Mariner either we didn’t have sufficient bandwidth or I wanted to get off the ship for a bike ride, beer, whatever.

The last update was a fishing update from our trip to the equator and was made while we were in San Diego.  I still have a full report to post on that trip once I get a full connection and time ( like when I get home). 

We left SD and transitioned North to the Columbia River where we went upriver to Portland, OR for a 5 day shipyard period.  A repair was made to our bow thruster and we had our 5 year ABS hull inspection as well as a USCG inspection.

We actually loaded for a science trip while in the drydock.  The trip was to placd a mooring off of the Washington coast and all of the group’s equipment and personel were brought onboard in the yard.  We were at full capacity as the trip, while actually providing some actual science (deploying a science buoy and instruments), was also filled with students and several other people who had no reason to be onboard other than to take up space, eat food and watch movies.  Fine and dandy until it was time to leave the dry dock and the shore power connection was disconnected and we had a four hour period before the ships power could be used.  That means no running water and no heads.  The poor little darlings have never expirienced such horror.

We left Portland and dropped our buoy off the coast on the way to Seattle.   We offloaded in Seattle then took on fuel and returned to our home dock inside Lake Union, which means locking through the Ballard Locks.  This lock through was a first for me as I was the helmsman for the trip.  Believe me when I tell you it is a Fucking Tight fit.  Add to it, that it was the day after Memorial Day and several clueless yacht owners were seriously close to being weeded out of the gene pool.  Words can’t explain some of the shit they are capable of.  If I only had a go pro for moments like these.

We reloaded for a trip to Station Papa in the Gulf of Alaska and that is where I’m currently updating from.   We end this trip in Dutch Harbor in a couple weeks and then go out to deploy around 70 sensors around an active volcano  / fault line in the Aleutian Islands.   I’ll get lots of pics and update when the stars align.

Until then, be good!

TT

There’s a hole in our schedule

We were supposed to have been beginning a mid-life refit onboard the Thomas G. Thompson, however it was decided to postpone the refit for one year. This ship is one of several that works under UNOLS scheduling. UNOLS is the University National Oceanographic Laboratory System (Click HERE for link) and our schedule is determined by a central dispatch type arrangement. If you are a scientist with a project in the Caribbean, they will schedule ship time for you on a ship that will be in the area. If you are working in the North Pacific, they will schedule time for you on the nearest ship and so on. Since we were “scheduled” to be in the shipyard now, we didn’t get put on the schedule. Later once it was decided to postpone the shipyard, the ship’s schedule was filled in as best as possible but we still had a six week gap at the dock.

We have been getting very familiar with our painting skills, cleaning, maintenance, etc. They are also doing some training. Next week there is one of the local maritime schools coming in to do Fast Rescue Boat Training. I won’t be able to make that because I’m getting sent out on the Clifford A. Barnes to help out for a short trip. I will get to take a course later.

We normally would be in the South Pacific at this time of year, but instead we will be getting spanked in the Gulf of Alaska over the winter. Stay tuned for a report. We have some other things to do first.

Happy Thanksgiving!