Category Archives: Maritime Jobs

Honolulu Fish Auction

The Sikuliaq is tied up at pier 35, just across the wharf from the Honolulu Fish Auction.  The Auction runs 6 days per week and as much as 100,000 pounds of fish can move through each day.  Beginning at 0100 boats arrive and offload the catch that they are delivering for the days auction.  At 0530 the auctioneer rings the brass bell to open the live auction and within a few moments fish are being sold.

Buyers from many different brokers, hotel restaurants,sushi bars, markets, etc. arrive and start inspecting the quality of the fish around 0430 and the live auction  starts around 0530.  As soon as the fish is purchased, a tag is placed on the fish to identify the buyer, the price per pound and a check is cut that day and sent to the fisherman.
All types of fish such as yellowfin tuna, bigeye tuna, mahi mahi, swordfish, wahoo, opah, and several bottomfish species such as paka paka , onaga are available to bid on.

Tours are available, or you can just come in and watch the action like I did.  If you go, remember to wear closed toed shoes.  Everyone is required to walk through a one half inch deep both of disinfectant as they enter.  It’s also climate controlled inside so bring a light jacket.

The fish are offloaded from the boats using big trailers they tow around with forklifts and brought over to the building.  They are weighed, sorted and tagged.  Once they have been purchased, the fish move out the far side of the building and are loaded into the buyer’s trucks.  Very efficient!

Above a tag shows the price paid was 2.40 per pound, the fish weighed 57 pounds and on the far right, almost out of the picture, shows who the buyer was.

Here’s another example:

Walking back to the ship, the skies opened up and we got a little wet.  It has been stormy and not so nice here the last few days, but it is a warm rain.

Our ship is nearly loaded and we will be casting off sometime soon.  Have a good week.

TT

Advertisements

Sikuliaq, tugs, shipyard and training

I’ve been home since just before Thanksgiving and enjoyed a nice holiday season with the family and got a lot done around the house too.  

Shortly after Thanksgiving I took a Vessel, Company and Facility Officer Course at PMI in Seattle. 

 Right after that I flew to New York City, rented a car and drove about an hour and half North along the Hudson River to complete my TOAR ( towing officer assessment record) on a very old diesel electric tug named the Cornell.  The program is offered by Diamond Marine Services and helps mariners like me who have a good chunk of their toar complete but are having a hard time getting the time at the wheel to finish the maneuvering portions.  In my particular case, the tugs I work on mostly tow freight barges from Seattle to Alaska.  When we pull into port, the chief mate, second mate and ab’s are all up on the barge to make her fast.  Only the captain remains aboard to maneuver the tug (sometimes the captain and chief mate trade roles).   It could take years before I could knock out all of the assessments, especially since we don’t do many of the maneuvers often or where I could break away from my job to get time to do them.  Diamond’s program lets you complete all the maneuvering with their tug and deck barge.  

As soon as I returned from New York, I turned in another application at the USCG in Seattle .  It took nearly 2.5 months to get my new MMC in the mail as they were so backed up with mariners trying to beat the rule change deadlines at the end of 2016.

I did one quick little overnight tug job from Seattle to Vancouver, Canada and back in January to deliver a barge to a shipyard:

Seattle, the Emerald City (evening):

Vancouver, Canada (very early am):

Mt. Baker along the way:

In early February, I was scheduled to work at Vigor Shipyards (formerly Todd Shipyard) for one month onboard the Thomas G. Thompson. She’s in getting a full makeover and re-power refit, re-pipe, paint, and many other upgrades. Shortly after getting my schedule all figured out, I received a call from the University of Alaska to make a relief trip on the R/V Sikuliaq.  I had to change my shipyard stint from one month to two weeks.  Trust me when I tell you that two weeks was plenty!  The ship is all torn apart and a ton of work to get done.  It was interesting to see the progress being made.  It will also be interesting to see if it will be done on time or not.

Shortly after accepting the relief gig on the Sikuliaq, I got called by my tug company to make a run to Dutch Harbor for roughly 35 days.  It’s their slowest time of the year so when I told them I found some relief work they were totally cool with it because they had several people to try and keep busy.  When I return in April they should picking up steam and probably keep me super busy over the summer.

So shortly I’ll be leaving home to join the Sikuliaq.  She’s got an ice class hull designed for science trips in the Arctic.  I’m meeting her in Hawaii and taking her to Newport, Oregon stopping by Musician Seamounts for some project that I’m not yet sure of.  She’s 261′ long, 55′ wide and was launched in 2014.  Until recently, she had a terrible reputation as having a awful ride.  A problem was discovered with the ships roll tank and once that was corrected the ride has improved dramatically according to those I’ve talked to.  We shall see.  Here are some more pics:

Everyone be well and I’ll try to keep updates rolling……..if the internet works.

Tug Boating to Alaska

20160827_164917

Hello sports fans!  I’m sorry to be away for so long from my blog (seems to be a recurring problem).

I went to Compass Courses in Edmonds in August for the 5 day Leadership and Managerial Skills course.  The course could have easily been packed into 2.5 days instead of 5, thank you USCG for your foresight on this issue!  On the last day of class, Aug 12th, I finished the final exam at 1100, got in my truck and drove to Everett, where my wife met me at the Dunlap Towing yard and drove my truck home for me while I crewed up on my first tug job.  Pretty much as I stepped on board, the gangway came up and we threw off the lines to get underway to Seattle.

In Seattle we stopped to fuel up and wait for our freight barge to be brought out to us from the Duwamish River by Western Towboat.  Western has a dedicated tug that operates around the Dirty D (Duwamish River) and it common for companies to handoff their barge or receive a barge from the Westrac (Western Towboat’s tug in the area) as they bring it in or out of the river to a waiting tug or place it on the West Seattle Buoys, where barges can be left for short periods of time as sometimes a berth needs to open or a tug is running late and the buoys are where these barges can be placed to keep them out of the way for short periods.

As soon as we fueled and made up to our barge we were underway for Alaska.  Our barge was 330′ and loaded with freight for Alaskan towns with mostly containers and some rolling stock like trucks and a new school bus.  Since I was on the mid watch from 12-0400 with the second mate, I went down for a nap before watch.  We passed very familiar places on the way out of Puget Sound and instead of heading west out of the Straights of Juan De Fuca, hung a right and Rosario Straights towards Vancouver Canada.  We passed through the Seymour Narrows sometime on my off watch when I was asleep and I didn’t get to see the famous narrow spot.  The last time I was through here was when I was a kid and we took our family boat North around 1978 (which I don’t remember much of).

20160813_13175820160815_18272820160816_18031320160817_11391920160817_11402920160817_165831

Other than going to Dutch Harbor and some of the Aleutian Chain last June on the research vessel, I’ve never been to Alaska.  Let me tell you this:  YOU NEED TO GO THROUGH THE INSIDE PASSAGE!  It absolutely stunning!  Of course the route that we took, was the most direct to Juneau possible, there is still an incredible amount of bays, coves, inlets, passes, mountains, etc to keep one busy for a lifetime of cruising.  We passed several cruise ships (it was cruise ship season) coming and going from Seattle to Alaska.  These huge ships haul ass and I could only think about the people who pay to “see” Alaska and then miss over half of it while their ship steams along at 20+ knots while the passengers are sleeping at night.  Of course they get to go many ports and take quick little excursions that we are unable to do on a freight run.

20160817_16583720160817_191929

2.5 days after leaving Seattle, we arrived in Juneau to offload some freight.  We needed to arrive on a tide, offload our freight, backload and lash the oncoming freight and a huge Taylor Forklift and depart before we lost the tide.  I think we were in town for around a total of 3 or 4 hours.  So much for seeing Juneau!  I could only see as much of it as was visible from our tug or our barge.

20160819_13321920160819_162623

A couple of days later we were at the top of the Inside Passage and headed out into the Gulf of Alaska headed toward the Alaskan Town of Yakutat.  Again we pulled in, offloaded cargo, back loaded cargo and departed for sea.  The only major difference from Juneau was the fact that the container yard we tied up to in Yakutat did not have a ramp for the forklifts to drive onto the barge and pick a loaded container and drive it off ashore.  Instead they used the Pass/ Pass technique where the barge forklift sets the container right at the rail and the forklift from shore picks it right off of our deck and drives it into the storage yard ashore.  

20160822_21505020160822_215052

At this point in the trip it was cloudy and rainy and we didn’t get to see shit as far the incredible Chugach Mountain range that we steamed right past.  A couple days more and we entered Cook Inlet heading towards Anchorage.  We arrived around 2200 and worked cargo until around 0200 in the morning and retired for the night.  This port is a major port and has all of the equipment to efficiently offload / backload cargos.  The downfall of this port is the massive 20+’ tide swings.  The tug actually has to break tow and go lay at another dock several hundred yards away from the barge.  When the tide goes out, the barge just sits on the mud bottom while cargo ops continue.  At this point, word came down that our mission would take us to Dutch Harbor with a small amount of container freight but after that we would travel West to Unmak Island and the town of Nikolski to load dirty dirt (more on that later).  In order to load dirty dirt, our barge needed a “fence” built on our barge of 40′ containers stacked two high and lashed all the way around the deck of the barge to help contain the load of dirty dirt.  The dock crew from the yard had this pretty much complete when we turned to in the morning around 0700.  We finished up, returned to the tug and waited for a delivery of stores to arrive (the cook had gone shopping at the grocery store).  As soon as the stores were loaded we made up to the barge and departed for sea.  I think we were in Anchorage for about 10 hours…never left the tug, barge or yard.  Great way to see the sights!

20160823_07490720160823_07492320160823_07500420160823_07501020160823_13011720160824_12243120160825_15455720160825_17384220160826_11331820160826_11335220160826_12460220160826_11333820160826_13234420160826_13234720160826_14563220160826_14563620160826_161155

20160826_18574420160826_19002020160826_19002420160826_19312920160826_220433

Once we got underway, we were headed west to the Aleutians.  The scenery along the Alaskan Peninsula and Kodiak Island was stunning!  While we didn’t have perfect weather we got to see quite a bit of the mountains and had some really good, flat water.  A few days later we arrived in Captains Bay (on the back side of Dutch Harbor Proper).  The scenery here was also amazing and it is nearly impossible to think of a more scenic port!  We discharged all of our remaining cargo and got immediately underway for Unmak Island and Nikolski.  the steam from Dutch was about 24 hours and upon arrival at Nikolski, we entered the bay, slowly steamed into the wind and started dumping wire from the tow winch while zig zagging our way upwind.  at the top of the bay, the tug made a big sweeping left hand turn and continued dumping wire until we were pretty much abeam of the barge about 100 yards away.  This is called “Laying on the wire” and is how we would remain for the next several days as loaded “dirty dirt”.  No anchor needed!

20160826_23350620160826_23354320160827_12501620160827_15121920160827_15123620160827_15400220160827_16491720160827_20415020160827_20413220160828_09532420160828_14380020160828_14380320160828_10452620160828_15070120160828_174247

The town of Nikolski is a group of around 18 houses and an Orthodox Church.  Mostly natives live from what I’m told.  The church, like many places in remote Western parts of Alaska, were built by the Russians way back when.  I’m sure all of the materials had to be brought in as there isn’t a tree in sight in any of the Aleutians that I saw except right in town were someone plated one.

As soon as we were secure, a landing craft came out from shore carrying a load of dirty dirt and picked myself and the ab cook up and took us over to our barge.  The landing craft could load 25 racks at a time.  Each rack carried 3 large bags of dirty dirt.  The dirty dirt is soil that is contaminated by diesel, spilled when the military departed the Aleutians after WWII.  Contractors dig up the dirt, fill the bags and place them on flat racks.  The landing craft crew loads 25 racks in a load and delivers them to the barge where they pass / pass the dirt aboard and we stack it and lash it for the ride to Seattle.  In Seattle, it is offloaded, transferred to rail and taken to Portland, Oregon to be incinerated and decontaminated.  We spent several days loading dirt.  Upon our arrival back at the tug, we found out the remaining crew had been busy catching five fresh halibut.  We gave one to the landing craft and I cleaned the rest as no one else knew how.  Fresh Halibut….Yum!

Once the dirty dirt was loaded, we returned to Dutch to load more dirty dirt that had been recovered from Adak a week or two earlier.  Once we got all of the dirt loaded, we filled in all the remaining space with heavy equipment that was pulling out due to the end of the working season.  We then received word that we would be standing by several days waiting for a second barge to come it from Naknek (Bristol Bay) before we could head toward to home.  We spent our days working cargo ashore or being tasked with moving barges around the harbor.  While we were tied up in Captains Bay, two different captain friends came in on factory trawlers and tied up at the next dock over from us.  Both times, we were so busy that I didn’t get a chance to walk over and say hello.  The next morning when we had time, they were gone.

We did manage to borrow the yard truck and go to the Dutch Harbor Library and get connected to the internet and chat with home.  It was about two weeks since I had been able to check in.  FYI: Verizon does not work in Dutch (AT&T and GCI are the only two at this time that do) but the local library has free wifi.  

We also went over and visited the new Gretchen Dunlap.  The Gretchen is Dunlap’s new harbor tractor tug and is quite impressive.  Read more about her here: Gretchen Dunlap.

Finally, after some weather delays, our barge arrived and we got underway from Captains Bay.  We steamed slowly out of the bay with our barge streamed astern way back on the wire.  The second tug pulled right up alongside of us and we passed them our Swede wire, which they attached to the tow gear.  We pulled tight on their tow gear as they broke off from it and pulled away from us.  We then pulled their tow gear onto our deck and made it up to our second tow wire / winch.  Then we streamed the second barge out, but not as far as our first barge, which was way back.  This is how we travelled back to Seattle.

20160908_13080520160908_13080720160908_13081620160910_12413220160910_12414620160911_13015520160911_13020520160911_16052520160911_16270820160911_17025920160911_17482320160911_19050020160914_11464420160914_12425720160914_14544720160914_152728

It took a total of 14 days to get back to Seattle and other than a couple of days crossing the Gulf of Alaska was very pleasant weather.  As we approached Vancouver Island on the Inside Passage, word was passed that we wouldn’t be allowed to travel further South than Cape Scott (N/ end of Vancouver Island) with two barges and that we would have to take the outside of Vancouver Island to return to Seattle.  Luckily for us, the weather was perfect!

We returned to Seattle and dropped our first barge off to the waiting Western Towboat tugs and while they took that barge upriver, we put the second barge on the buoy for them to retrieve when they are finished with the first barge.  We steamed two hours back to our yard in Everett and 45 minutes after tying up, I was at home, kicking my feet up and chillaxin.

Great trip overall.  There are things I really like about tugs and things I don’t like.  For the sake of any new people getting their feet wet and trying to decide what sector of shipping they would like to get into, here are a few of my thoughts:

Likes:

Small crews and no passengers to deal with.

Better pay than research vessel

Great crews with lots of experience and willing to teach a FNG like me

Towing shit is cool and the making and breaking a tow is cool.

I was left pretty much to my own to find shit to do / what to paint/ projects etc.

Yard is very close to my home

Dislikes:

The tug gets very small after a couple of weeks.  Bring books, movies etc to stay occupied in your time off.

The tug gets its ass kicked in weather more than a big ship.  You will feel it and the tires on the side of the hull take a bit of time to get used to.  The engine noise is much louder than it was on the ship I was on.  I slept with ear plugs at all times.

Comms with home are very limited compared with what I came from.

There isn’t really any schedule going to these remote areas.  Weather and customer delays are common.  Alaska freight is boom or bust depending on the season.  Prepare to be super busy in the spring / summer / early fall and slow in winter for the most part.  This works really well from some people as they like to travel during the winter.

The bunks on the tugs were built for short people.  If you’re tall like me, prepare to sleep sideways or with your legs bent. (Yes, I know I’m being bitchy)

Overall very good trip and I learned a ton!  Total was 37 Days.

 

 

 

North to Alaska on the tug Polar Endurance


Lots happening here since finishing mate school.  The very day I passed Terestrial Nav at the USCG REC in Seattle, myself and one other crew member drove to Port Ludlow, WA to meet the R/V Clifford A. Barnes.  I relieved the captain for the balance of a five day trip.  The trip was a continuation of the trip when we broke down.

After completing the voyage, there really wasn’t much work on the books until mid September so I started running the local Vessel Assist boat again until I could find something else.  I had sent out my resume to several tug / shipping companies.  Last Thursday in the late afternoon, while I was towing a broken Bayliner back to port, Dunlap Towing of Everett, WA called and asked if I was available.  I let them know that I was enrolled in a Leadership & Mangement Skills course the following week.  The course is being required by the USCG to be completed by the end of this year.  The call from Dunlap was late afternoon on Thursday and on Friday morning I was taking a physical, drug test and work test in downtown Seattle.  Dunlap had tossed around a few different start dates but really hadn’t pinned it down for sure.  After the physical, I drove to their office to fill out some paperwork for them and they pinned down the date for this Friday as soon as I get out of class!

Like I said, things are moving fast.  Here is some information about the tug I’ll be on from tugboat information: Polar Endurance

I’ve really only ever been on one other tug, and that was a tour at Western Towboat in Seattle.  I’ve got a lot of learning to do and I’m really looking forward to it.  We are towing a loaded freight barge from Seattle to several ports in SE Alaska and possibly going to Dutch Harbor before heading home.  The one thing I expect is changes to the schedule and port of calls along the way.  It’s Alaska and the weather gods and customers throw lots of curve balls.

For me, Dunlap is just across the bridge from my home town, maybe a 20 minute drive.  Most of the crew changes happen right there, so it is very easy.  Hopefully they will like me and ask me to go on another trip after this one!  Stay tuned.

Todd

Summer Happenings

Returned home from the South Pacific at the end of April and have been nonstop since.  Here are some notes about what has been happening.  I told myself to not wait so long between posts and keep this blog more updated and will try to in the future, especially since I can’t use the slow internet excuse now that I’m home.

So here goes:

A couple days after getting home, I went to Westport to run halibut charters for my friends Mark and Merry at All Rivers and Saltwater Charters.  They have built their business into a year round sport fishing operation with the main focus being on tuna during the summer on board their four Defiance 29 Pilothouse boats.  They also run salmon, bottom fish, halibut, ling cod, and river fishing trips.  They have some very reliable, professional captains and I fill in occasionally to allow them time off for weddings, days off, etc throughout the season when I’m not at sea on my regular ship.

The way the season works is there is a deep water halibut opener every Sunday and Tuesday until the overall area quota is caught.  In recent years this means maybe a total of 3-4 total days of halibut fishing.  This year, we fished Sunday, Tuesday, the following Sunday was blown out due to weather, and a final Tuesday.  Then the season was over.  I had originally avoided committing to the final Tuesday in anticipation of a 5 day research vessel trip onboard the Clifford A. Barnes.  I had been contacting the Port Captain over and over to get confirmation the trip was a go but had no reply and no firm plan ( turns out he was in Korea) so I went ahead and committed to run a charter on the final Tuesday halibut opener.   Shortly after committing, I was also confirmed to run the research cruise starting on Wed (be onboard 0630).  I finished the halibut trip, finished receiving payments and hauled ass for home (3 hour drive), got home a 2230 Tuesday night, repacked my clothes and gear, crashed out and my wife drove me to Seattle at 0530 Wednesday morning.

This was my first trip as captain of the Barnes and took place at the Elwha River near Port Angeles (also where the Port Angeles pilot station is for large ships entering Puget Sound).  The marina is very tight and is where one of the three Westport Yacht factories are located ( recently purchased by the Chouest Family).  There are usually a few Westports parked in a already packed marina.  The long time Barnes captain of 27 years was on board to walk me through the boat, answer questions but mostly to train me how to maneuver this old girl.  She was built in 1965 as a USCG Ice Breaking Harbor Tug and has a fairly deep forefoot and nearly flat stern.  Captain Ray says “she handles like a salad bowl with a too small rudder”.  I took her from our home dock in Lake Union, through the Ballard Locks and out to Port Angeles.  Our pre-arranged moorage spot ended up being directly behind a 125′ Westport Yacht with two more parked across the narrow fairway behind us (where we would normally turn).  To ice the cake, the opening day of halibut season in this area was during our stay, which meant a whole bunch of small boats coming and going, coming and going to the fuel dock adjacent to our berth and just adding to my trial by fire.  After a couple of days of tutoring me on the finer points of the Barnes,  Captain Ray headed home and left me and my mate, Ken, to run the rest of the trip,  everything went fine and I really got a pretty good feel for this old girl.

The cruise itself was an extension of an earlier project monitoring the effects of removal of two hydroelectric dams on the Elwha River and studying the sediment flows from the river mouth into the bay.  It is the third time I’ve been able to do this cruise in the last few years and the change each time is extraordinary.  On the evening of the forth day (Saturday evening) the science party disembarked choosing to drive back to Seattle instead of steaming on the Barnes (8.5 knots cruising speed) approx 9-10 hours. Ken and I departed around five in the morning and arrived back at the UW around 1400.  Ken’s family picked him up within minutes of getting tied off and I hung out for a bit until my buddy Mikey arrived.  We went downtown, parked, found a killer sports bar and ordered some grub and cocktails and went to the Key Arena (former home of the Seattle Supersonics – fuck you very much NBA) and went to The WHO Concert.

Yes THE WHO are old.  YES they still rock and put on an amazing show.  Check that off of my bucket list, before they kick the bucket.  Got home around 0030 Monday morning.

Out the door 0630 to head to Ballard to Crawford’s Nautical School for a license prep course.  Crawford’s has been in operation since 1923 in some form or another and is family run and owned.  Crawford’s differs from many other prep courses that offer similar training.  They operate on a four week rotating schedule with week A being rules of the road, B being Nav Gen, C being Deck Gen and Deck Safety and week D being Bridge Resource Management (BRM).  Then you self study from home or in class until you feel you are ready to test at the Coast Guard for your appropriate license level (smaller license levels can test at Crawford’s).  I’m working on my 1600 Mate Near Coastal license.  I sat in on the four weeks of classes with the only variation being that instead of doing week D (BRM) I went to a different classroom with a few other students and studied Terrestial Navigation since I had already BRM.  T-Nav includes navigation along coasts by dead reckoning, taking bearings from known points such as lighthouses, buoys, prominent land features, etc., figuring distance traveled with speed by wheel or RPM, tide and current calculations and things like vessel intercepts, and hurricane avoidance. It also has some celestial navigation included like azimuth of the sun or star, amplitudes of the sun and sunrise / sunset calculations.  For my license level the T-Nav module (test) is 15 questions and I can only miss one in order to pass.  Another major difference that is different at Crawford’s vs. another school or course, is that once you pay the course fee, it is good for one year.  You can come and go as you like or as your work schedule allows.  This is really nice for the working mariner, however you must be diligent and stick to a plan in order to finish.

While in class, my regular ship, the Thomas G. Thompson passed our window on the way to the shipyard for the next year.  Seattle Times did a nice write up here TGT heads to yard.

If anyone plans to test or upgrade their license, I highly suggest reading the following post from fellow blogger Crewboat Chronicles detailing the process.  I referenced this post many times through the process and found it extremely helpful.  Read it here:  Hawsepipers guide to applying, studying, passing Master / Mate 500/1600

My original plan, prior to actually taking the course, was to take the four weeks of courses and then study from home for about a month before testing.  Once we got into the meat of the program, it became apparent that I would be much better off with instructors from Crawford’s assisting me.  To get to Crawford’s takes almost exactly 45 minutes to drive from my house.  That’s with no traffic.  This is Seattle, there is traffic.  Slow, painful traffic which turns my drive into at least 1.5 hours each way.  To compensate for the traffic, I started leaving home at 0500 and staying at class until 1900 each day.  This also allowed me to study alone for a couple hours in the mornings and evenings and really get a lot done but have assistance for questions during the day.  It worked awesome and I made a tentative plan in mind head to test this coming week.

Then my port captain called and needed me to run two five day trips on the Barnes back to back.  This cut my plan down by one week.  I didn’t want to try and take a couple weeks off from studying and then try to re-enter and have to make up ground, so I decided to try and take the tests Wed, Thurs and Fri just before the Fourth of July so I called the USCG and scheduled testing times at their local regional exam center.  When I scheduled with them, they put me on the schedule, but they said call back Monday and confirm with Bill ( he runs the testing room) as he would be returning from vacation.  On Monday when I called Bill, he said no testing on Friday because they were getting early liberty for the 4th of July, but that I could instead test on Tues, Wed and Thursday.  That cut my study time by one more day.  The tests are given in modules and for my license I need 6 modules.  You have to take a minimum of two each day and they must be done on consecutive days.  If you pass four, you are locked in and can come back at any time in the next 90 days to complete missed modules.  Miss three or more and you must do a full re-take of all 6 modules.  When my study schedule was reduced, I made a tactical decision to focus all of my effort on four modules: rules, t-nav, nav gen and chart plotting.  I would leave deck gen and deck safety for last and didn’t spend any time studying them.  Not at all how I would have liked to approached the exams, but shit happens.

The first day of testing you must take Rules first and then it is your choice which modules to do next.  I missed one on Rules.  Then I took t-nav because I wanted to get it while it was fresh in my brain.  I could only miss one…I missed three.  Ended the day 1 for 2.  Went back to class (5 miles away) and studied until 7 pm.  Thursday I started with the chart plot (15 questions can only miss 2).  I missed two and passed!  Then did nav-gen and passed.  Ended day two 3 of 4 total.  Day three I now must pass at least one of the final two subjects ( the two subjects I really haven’t studied at all).  Passed them both!  Ended five for six.  A huge relief!  Then I reported to the Barnes and spent a couple days provisioning and loading gear.

We had a successful first day and made it to our anchorage and experienced a trip ending mechanical failure.  We organized getting the science party disembarked with our small boat the next morning  and have made plans for a tow back for repairs.  The good news is that crab season just opened and few of the crew had pots and a cooker onboard so we had a fresh crab lunch yesterday while logistics were being worked out for our tow.

Repairs so far seem like they should go pretty quickly and we will be on schedule for our next trip.  This current trip will likely be rescheduled shortly after.  I will work in a week of study and go pass that last module.

Whew, that was a long post!  Everyone be safe and have a good summer.  More news coming soon!

T

Worldwide Shipping Lanes Video

Here is a cool video that makes it really easy to see just how busy some of world’s most busy shipping lanes really are. Most people don’t give two hoots about how most things they use daily come from. Almost everything we use daily is shipped via ship, train, or truck, and sometimes multiple variations of these combined. In this video you can clearly see the pathways that enable shippers to get from point A to point B and how popular those routes are.

Through the use of AIS (automatic Identification System), this video is possible:

Seattle’s Ballard Locks & Ship Canal: Entering from sea

We came through through the Ballard Locks and ship canal to the University Of Washington today. I decided to take photos along the way and show some of the sights and ships along the way.

To enter the channel you aim just to the right of Shilshoe Bay Marina. There are a lot of sailboats in this marina. When the wind blows, there is one hell of a lot of clanking going on:
IMG_20141207_131845_486

IMG_20141207_131842_549

IMG_20141207_132203_902

IMG_20141207_132234_571

IMG_20141207_132336_666

Just inside the entrance of the channel on the left side is Ray’s Boathouse Restaurant and to the left of that is Anthony’s Restaurant, both very good seafood joints.

IMG_20141207_132542_120

You will then pass many waterfront homes and soon see the Burlington Northern Rail Bridge in the distance. The Ballard Locks are just on the other side of the bridge around the corner to the left:
IMG_20141207_132551_440

IMG_20141207_132616_731

IMG_20141207_132933_896

IMG_20141207_132739_068

IMG_20141207_132646_025

IMG_20141207_132639_098

IMG_20141207_132632_843

If you are in a large vessel, you will have to get the bridge open. Today we didn’t need an opening on the Clifford A. Barnes Research Vessel. The bridge was already open for a tug and barge ahead of us that went into the large locks:
IMG_20141207_133042_321

IMG_20141207_133115_199

Just as you turn to go under the rail bridge, you will see the locks up ahead. The large locks is on the left and the small locks are on the right. Just before entering, there is a waiting wall on the right. Being that we were in a government vessel, we went in first:
IMG_20141207_133144_493

IMG_20141207_133246_390

IMG_20141207_133252_105

Often they will pack several vessels at a time in the lock. Once everyone is tied off, the gates will shut and the level will rise or fall depending which way you are going:
IMG_20141207_133356_395

IMG_20141207_133344_154

IMG_20141207_134027_875

The fish ladder is over in the corner by the yellow pipes, just below the condos:
IMG_20141207_133416_094

The small locks couldn’t be more easy. You loop your dock line over the button and make it fast. The buttons are on large floats that stay the same level as your vessel when the levels change. In the large locks, you heave your lines over to the attendants and then you manage your lines and you rise or fall.
IMG_20141207_133910_649

IMG_20141207_133903_881

Once the water has risen and the lock opens, you are now in fresh water of the ship canal / Lake Union / Lake Washington. This is the home to many tug companies, commercial fishing vessels (many of them are based in Seattle but fish in Alaska), tour boats, private boats, houseboats, yachts, etc.
IMG_20141207_134444_316

Here is the Army Corps of Engineers “Puget” that collects logs and sunken vessels from the locks and nearby channels that would otherwise restrict vessel traffic:
IMG_20141207_134818_519

IMG_20141207_134900_074

A tug waiting to enter the large locks outbound:
IMG_20141207_134906_607

Looking back into the locks where we just came from (looking West):
IMG_20141207_134831_566

The emergency lock gates and crane. If the lock gates were to fail, the Army Corps would place these emergency gates to keep all of the fresh lake water from flowing through the locks until repairs could be made.
IMG_20141207_134837_835

IMG_20141207_134845_808

IMG_20141207_134903_531

IMG_20141207_134942_154

IMG_20141207_135053_466

IMG_20141207_135152_620

IMG_20141207_135132_574

IMG_20141207_135036_521

The Highland Blight, officially named the Highland Light, has been stinking up the place for a long time. It’s probably good for scrap now, but someone is living the dream of one day sailing this tub back to sea.
IMG_20141207_135013_236

IMG_20141207_135127_757

IMG_20141207_135105_561

Kirby Tugs (formerly K-Sea):
IMG_20141207_135006_442

This is Ballard. Ballard was once a working man’s town but is almost completely yuppified now. Other than a little industrial area and some working waterfront it’s all shops, condos, coffee, bars and thick black frames glasses.

IMG_20141207_134952_627

IMG_20141207_135057_887

The Stabbert’s built a marina for yachts with condos above:
IMG_20141207_135157_564

IMG_20141207_135202_562

IMG_20141207_135246_657

Starting to see the Ballard Bridge in the distance:
IMG_20141207_135310_699

IMG_20141207_135214_244

IMG_20141207_135318_505

IMG_20141207_135328_206

IMG_20141207_135305_554

IMG_20141207_135249_993

IMG_20141207_135355_742

IMG_20141207_135450_819

Just before going under the Ballard Bridge, Fisherman’s Terminal is on the right:
IMG_20141207_135543_974

IMG_20141207_135540_565

IMG_20141207_135419_801

IMG_20141207_135412_379

IMG_20141207_135536_659

IMG_20141207_135527_914

IMG_20141207_135405_985

IMG_20141207_135402_736

IMG_20141207_135515_438

IMG_20141207_135606_140

IMG_20141207_135718_118

IMG_20141207_135727_279

IMG_20141207_135616_782

Just after the Ballard Bridge on the right hand side of the channel is Coastal Transportation:
IMG_20141207_135638_050

IMG_20141207_135742_351

IMG_20141207_135745_517

On the left side is the Bold. Another ship that rarely moves. If it does, it’s just to a new berth.
IMG_20141207_135645_665

Then you come to Trident Seafood’s yard on the left and Ocean Beauty Seafood’s on the right:
IMG_20141207_135648_898

IMG_20141207_135808_089

IMG_20141207_135815_043

IMG_20141207_135906_330

IMG_20141207_135909_252

IMG_20141207_135830_123

IMG_20141207_135834_696

Redden Marine Supply is next on the right:
IMG_20141207_135935_963

IMG_20141207_135842_257

IMG_20141207_135939_224

IMG_20141207_135848_238

IMG_20141207_135943_158

IMG_20141207_135957_640

IMG_20141207_135954_684

Foss Shipyard is next on the right:
IMG_20141207_140032_135

IMG_20141207_140030_180

IMG_20141207_140002_944

IMG_20141207_140034_250

IMG_20141207_140040_814

IMG_20141207_140102_387

IMG_20141207_140136_967

IMG_20141207_140108_116

IMG_20141207_140140_811

IMG_20141207_140143_205

IMG_20141207_140130_267

IMG_20141207_140200_344

A few more fish boats on the left and then….
IMG_20141207_140006_277

IMG_20141207_140023_722

IMG_20141207_140047_780

IMG_20141207_140049_195

Western Towboat’s Yard is on the left. Their tugs always stand out in yellow and blue!
IMG_20141207_140117_028

IMG_20141207_140053_964

IMG_20141207_140120_765

IMG_20141207_140056_201

Just after Western Towboat is Kvichack (pronounced V-Jack). Builders of aluminum vessels:
IMG_20141207_140149_207</a

IMG_20141207_140213_039

Then some more small boats on the right and Lakeside (Sand & Gravel) on the left:
IMG_20141207_140145_849

IMG_20141207_140221_179

IMG_20141207_140223_404

IMG_20141207_140226_421

IMG_20141207_140206_794

IMG_20141207_140313_506

Turn around and look where we just came through:
IMG_20141207_140342_786

Then you enter the Fremont Cut. The area is lined with trees and bike / walking paths on both sides. Many large tech firms are on the left side and Seattle Pacific University is on the right. At the end of the cut is the Fremont Bridge (short) followed by the Aurora Bridge (tall):
IMG_20141207_140718_552

IMG_20141207_140350_079

IMG_20141207_140721_309

IMG_20141207_140411_228

IMG_20141207_140758_124

IMG_20141207_140431_875

IMG_20141207_140850_532

IMG_20141207_140624_285

After going under the Aurora Bridge, you start to enter Lake Union. Once in Lake Union you will see the big grassy hill on the left called Gasworks Park. This is where Seattle’s 4th of July Fireworks are launched each year. It just was redone and new grass seeded. On the right as you enter into Lake Union you will see downtown Seattle.
IMG_20141207_140956_457

IMG_20141207_141021_565

IMG_20141207_141052_587

There is Fremont Tug on the left:
IMG_20141207_141045_789

IMG_20141207_141017_926

IMG_20141207_141013_458

IMG_20141207_141035_013

IMG_20141207_141031_179

IMG_20141207_141009_349

IMG_20141207_140959_054

IMG_20141207_141028_713

IMG_20141207_141055_509

IMG_20141207_141148_006

IMG_20141207_141106_789

IMG_20141207_141155_835

IMG_20141207_141116_407

IMG_20141207_141205_225

IMG_20141207_141118_766

IMG_20141207_141209_739

IMG_20141207_141144_726

IMG_20141207_141222_388

IMG_20141207_141237_023

IMG_20141207_141327_219

IMG_20141207_141248_482

IMG_20141207_141328_504

IMG_20141207_141251_149

IMG_20141207_141411_035

IMG_20141207_141324_462

IMG_20141207_141421_246

IMG_20141207_141325_847

IMG_20141207_141426_143

IMG_20141207_141439_815

IMG_20141207_141613_792

IMG_20141207_141445_566

As you round the end of Gasworks Park at the North end of Lake Union you start to see the Interstate 5 bridge:
IMG_20141207_141617_567

IMG_20141207_141458_906

IMG_20141207_141620_679

IMG_20141207_141609_526

IMG_20141207_141651_085

IMG_20141207_141611_942

IMG_20141207_141737_516

IMG_20141207_141739_557

IMG_20141207_141817_519

IMG_20141207_141750_200

IMG_20141207_141845_453

IMG_20141207_141753_189

IMG_20141207_141855_441

IMG_20141207_141811_101

IMG_20141207_141904_618

IMG_20141207_141815_548

IMG_20141207_141909_024

IMG_20141207_142015_356

IMG_20141207_142127_024

IMG_20141207_142019_912

IMG_20141207_142131_082

IMG_20141207_142022_958

IMG_20141207_142139_833

IMG_20141207_142031_782

IMG_20141207_142144_069

A dry rack for ski boats. This isn’t all that old. It is soon to be torn down so that new condos can be built. The working waterfront is disappearing.
IMG_20141207_142040_766

Just before going under I-5 there is an Ivar’s Salmon House on the left. Keep Clam!
IMG_20141207_142234_011

Just as you go under the I-5 bridge (tall) you make a sharp right and pass under the University Bridge (short) and enter Portage Bay. On the left side of Portage Bay is the University Of Washington (where my other ship, the Thomas G. Thompson is berthed) on the right are a bunch of houseboats. At the SE end is the Seattle yacht Club:
IMG_20141207_142244_480

IMG_20141207_142336_764

IMG_20141207_142249_484

IMG_20141207_142404_068

IMG_20141207_142309_654

IMG_20141207_142407_611

IMG_20141207_142321_210

IMG_20141207_142423_810

IMG_20141207_142332_722

IMG_20141207_142451_765

IMG_20141207_142545_409

IMG_20141207_142632_775

IMG_20141207_142549_424

IMG_20141207_142635_737

IMG_20141207_142551_729

IMG_20141207_142727_851

IMG_20141207_142618_110

IMG_20141207_142803_608

IMG_20141207_142620_437

This transit ended for me at the U of W dock. If you were continue just around a slight left turn and go through one more cut, you’d pop out into Lake Washington right near the Husky Stadium. The transit from the Locks to the U of W takes about 45 minutes.